|
ROTARY TOPPERS |
Contact us now for more
information sales@twose.com
Literature Download
|
TE4 - 1.2m (4') Cut
TE5 - 1.5m (5') Cut
TE6 - 1.8m (6') Cut
TE7 - 2.1m (7') Cut
A range of three point linkage mounted Rotary Toppers, single
rotor with swinging blades. For cutting grass weeds and material
up to 25mm (1") diameter, suitable for tractors of 15HP and
over with 540rpm PTO.
|
| |
Working Width |
Transport
Width |
Cutting Height |
Tractor
Requirement |
| TE4 |
1.2m (4') |
1.32m (4'4") |
25-150mm
(1-6") |
15HP |
| TE5 |
1.5m (5') |
1.60m (5'3") |
25-150mm
(1-6") |
20HP |
| TE6 |
1.8m (6') |
1.93m (6'4") |
25-150mm
(1-6") |
30HP |
| TE7 |
2.1m (7') |
2.23m (7'4") |
25-150mm
(1-6") |
45HP |
|
Contact us now for more
information sales@twose.com
Literature Download
|
| CYCLONE
ROTARY TOPPER RANGE |
Cyclone 180 - 1.8m (6') Cut
Cyclone 240 - 2.4m (8') Cut
Cyclone
240 Offset - 2.4m (8') Cut
Cyclone
275 - 2.75m (9') Cut
A range of three point linkage mounted Rotary Toppers, single and
twin rotor with swinging blades. For cutting grass weeds and material
up to 25mm (1") diameter, suitable for tractors of 15HP and
over with 540rpm PTO.
|
| |
Working Width |
Transport
Width |
Cutting Height |
Tractor
Requirement |
| Cyclone
180 |
1.8m
(6') |
2.0m |
25-114mm |
35HP |
| Cyclone
240 |
2.4m
(8') |
2.64m |
25-114mm |
40HP |
| Cyclone
240 Offset |
2.4m
(8') |
1.8m |
35-140mm |
40HP |
| Cyclone
275 |
2.75m
(9') |
2.94m |
24-114mm |
45HP |
|
Contact us now for more
information sales@twose.com
Literature Download
|
RT7 2.1m (7') Semi-Offset
- Three point linkage mounted
- Adjustable skids for varied cutting height
from 25mm-150mm (1"- 6")
- Overlapping blades to prevent stripping
- 540rpm PTO speed
- Heavy duty oil-filled gearbox
- Robust construction for a long working life
- Swinging blades
- Heavy duty straps allow machine to float
when working
- RT9 fitted with end linkage as standard for
easy transport
RT9 2.72m (9') In-Line
- Three point linkage mounted
- Adjustable skids for varied cutting
height from 25mm-150mm (1"- 6")
- Overlapping blades to prevent
stripping
- 540rpm PTO speed
- Heavy duty oil-filled gearbox
- Robust construction for a long
working life
- Swinging blades
- Heavy duty straps allow machine to
float when working
- RT9 fitted with end linkage as
standard for easy transport
|
| Specification |
Overall Weight |
No. of Blades |
Power Requirement |
| 2.1m (7') |
330kgs (728lbs) |
4 |
26-60kw (35-80hp) |
| 2.72 (9') |
480kgs (1050lbs) |
6 |
37-60kw (50-80hp) |
|
Contact us now for more
information sales@twose.com
Literature Download
|
| MAXICUT
FLEX WING MOWER SERIES |
The
MAXICUT FLEX WING MOWER, specifically designed for large open
spaces, offers wide-angle constant velocity drive shafts and slip clutch
protection. With its clean lines, this new design ensures debris from
cutting does not collect and rot on the machine's deck and therefore
maximises the working life of the equipment. Full length hinges and long
travel lift rams, moving through 112 degrees allow the mower to follow
ground contours over its full operating width. The Tri-Wing 4600 has a
transport width of only 2.70 metre (8'9").
Standard Features
Cutting widths of 4.6 or 6m
Six heavy-duty updraft blades
Cutting height can be easily adjusted from 25mm - 37.5mm
Wing flex enables the mower to move 90° up - 22° down
Integral baffles
Hydraulic level lift system
6 wheels
Wide angle, constant velocity drive shafts
180hp splitter gearbox
The three 140hp rotor drive gearboxes all have slip clutch
Gearbox covered by three year warranty
Light bar kit
Optional Features
Wheel kit (two extra wheels)
Shredder blade kit
3rd blade on each rotor (4600 only)
|
|
Contact us now for more
information sales@twose.com
Literature Download
|
| SCHULTE
S150 FLEX WING MOWER |
4.5m (15ft) mowing width heavy duty rotary topper
for setaside and other large areas. Rear lights as standard. Divider
gearbox rated at 200hp. Wing gearbox rated at 160hp. 3 years manufacturers
warranty on gearboxes. Lowered and lifted out of work by 3 double acting
phased hydraulic cylinders therefore giving accurate cutting height. Cuts
up to 3 1/2" diameter. Large updraft blades with tip speed of 15708
ft/min. Suitable for tractors of 85HP+.
|
